Vector files for laser cutting
A laser follows a path. Trace the artwork into closed polygon contours, decide cut versus engrave, and export DXF with real units.
- Preset
- Laser
- Palette
- Noir et blanc
- Sortie
- DXF
- Prix
- Aperçu gratuit
Déposez une image ici, ou collez-la
Votre image n'est jamais envoyée. Elle est tracée dans cet onglet.Ouvrir le convertisseur complet
Preset
- 01Logo16 couleurs
- 02TraitNoir et blanc
- 03Photo64 couleurs
- 04Broderie8 couleurs · Découpe
- 05Vinyle4 couleurs · Découpe
- 06Laser — défini pour cette pageNoir et blanc · Polygone
- Sortie · SVG · PDF · EPS · DXF
- Aperçu gratuit · téléchargement avec Pro 9,00 € / mois
- Votre fichier reste dans cet onglet
Ce que le logiciel exige
- DXF the machine software reads
- The exporter targets AutoCAD R2000 (AC1015). It is the version LightBurn, LibreCAD, Fusion and most CAM importers list as their safe default.
- Real drawing units
- DXF carries units, so the drawing has a physical size before it reaches the machine. Set it here rather than scaling in the controller, where the rounding is invisible.
- Closed contours, holes included
- A cut path has to close or the part falls out mid-job. Interior holes are separate contours with opposite winding, which is how a cutter knows to keep the middle of an O.
- Cut and engrave are different files
- A traced outline is a region boundary, so a drawn line becomes two contours — one per side. Cutting that gives you a hairline sliver; engraving it wants a centreline your machine software generates.
- Kerf accounted for once
- The beam removes material. Apply kerf compensation in the machine software, not by scaling the artwork, or you will apply it twice.
Preset
The laser preset traces binary — the machine has no colours, only power settings — and fits straight polygon segments at high coordinate precision. A polyline says exactly one thing to a controller; a spline gets re-interpolated by every piece of software between here and the head.
Pourquoi vectortrace
- Preuve 1 / 3
Dans le navigateur, en privé
Le moteur est du WebAssembly exécuté dans un worker sur votre propre machine. Votre image n'est jamais envoyée — il n'y a donc rien à divulguer, rien à supprimer, et rien à croire sur parole.
- Preuve 2 / 3
Des chemins modifiables, pas un habillage
Le moteur regroupe l'image en régions de couleur, prend la frontière entre elles et y ajuste des courbes. Ce qui en sort est une géométrie réelle — un fond par région, chaque nœud déplaçable — produite dans l'onglet et jamais sur un serveur.
- Preuve 3 / 3
Des formats pour l'impression et la production
SVG et PDF pour le visuel ; EPS et DXF pour découpeuses, graveurs et logiciels de broderie. De vrais fichiers, ouverts dans Illustrator, Inkscape et LibreCAD — pas un SVG contenant un JPEG.
Benchmark
Mesuré, pas vendu. Le corpus, la méthode et chaque chiffre produit par l'exécution sont publiés intégralement.
Méthodologie → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
Questions
- 01DXF or SVG for a laser?
- DXF if the software takes it, because it carries units and every CAM tool reads it. SVG if you are going through LightBurn or a browser-based controller that prefers it. The geometry is identical; only the container differs.
- 02Why did my engraved line come out as two lines?
- Because tracing outlines regions, and a stroke is a thin region with two sides. That is right for cutting a shape out and wrong for engraving. Use the centreline option in your machine software for line work.
- 03What DXF version is written?
- AutoCAD R2000 (AC1015). Newer DXF versions add features a cutter never uses and drop compatibility with importers that were written once and never updated.