Vector files for vinyl cutting
A plotter follows outlines. Trace the artwork into a small number of closed, disjoint shapes — one per colour of vinyl — with nothing too thin to weed.
- 预设
- 刻字膜
- 调色板
- 4 种颜色
- 输出
- SVG
- 价格
- 免费预览
将图像拖放到此处,或直接粘贴
您的图像绝不会被上传,它会在此标签页中完成描摹。打开完整转换器
预设
- 01标志16 种颜色
- 02线稿黑白
- 03照片64 种颜色
- 04刺绣8 种颜色 · 镂空
- 05刻字膜 — 本页所用设置4 种颜色 · 镂空
- 06激光黑白 · 多边形
- 输出 · SVG · PDF · EPS · DXF
- 预览免费 · 使用 Pro(每月 €9.00)下载
- 您的文件始终留在此标签页中
软件所需条件
- One layer per colour
- Each colour is a separate sheet of vinyl, cut separately and layered by hand. Cutout mode produces exactly that: disjoint regions with no overlap to register.
- Nothing too thin to weed
- Thin slivers and single-pixel bridges cut fine and lift with the waste. The preset filters small regions and drops short edges before they become cut paths.
- Closed contours with correct holes
- The counter of an O has to be its own contour or the blade never cuts it out. Traced region boundaries are closed by construction.
- No fills, no strokes, no effects
- A plotter ignores everything except the path. Drop shadows and outlines from the source image become extra cut shapes, so remove them before tracing rather than after.
- A size decided before the cut
- Scaling after tracing scales the smallest features too. Set the physical size first and check the thinnest part at that size.
预设
The vinyl preset traces four colours in cutout mode with a heavy speckle filter and a long minimum edge. Every one of those numbers is about weeding: a sliver two pixels wide is a path the blade will cut and your tweezers will tear.
为什么选择 vectortrace
- 凭证 1 / 3
浏览器内运行,隐私可靠
该引擎是运行在您设备上一个 Worker 中的 WebAssembly 程序。您的图像绝不会被上传 —— 因此没有可泄露的内容,没有需要删除的内容,也无需盲目信任任何一方。
- 凭证 2 / 3
真正可编辑的路径,而非套壳处理
引擎会先将图像划分为若干色块区域,提取区域之间的边界,并对其进行曲线拟合。得到的是真正的几何图形 —— 每个区域一个填充,每个节点都可以自由移动 —— 全部在标签页本地生成,从不经过服务器。
- 凭证 3 / 3
印刷与生产实际使用的格式
SVG 和 PDF 适用于设计稿;EPS 和 DXF 适用于刻字机、雕刻机与刺绣软件。都是真正可用的文件,能在 Illustrator、Inkscape 和 LibreCAD 中打开 —— 而不是内嵌 JPEG 的 SVG。
基准测试
用数据说话,而非营销话术。语料库、测试方法以及本次测试产生的每一项数据均全部公开。
测试方法 → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
常见问题
- 01Does the SVG import into Cricut Design Space or Silhouette Studio?
- Both read SVG. Silhouette Studio also reads DXF in some editions. Import the SVG, confirm the size in the software, and check the smallest feature at that size before you cut.
- 02Why are there tiny shapes in my cut file?
- They are small regions the tracer found and kept. Raise the speckle filter until they disappear from the path count — deleting them by hand afterwards is slower and easy to get half-right.
- 03Can I cut a photograph?
- You can cut a posterisation of one. Trace with two to four colours and treat it as a stencil; a photograph has no natural boundaries to cut along, so the result is a design decision rather than a reproduction.