Vector files for vinyl cutting
A plotter follows outlines. Trace the artwork into a small number of closed, disjoint shapes — one per colour of vinyl — with nothing too thin to weed.
- Preset
- Vinyl
- Palette
- 4 Farben
- Ausgabe
- SVG
- Preis
- Kostenlose Vorschau
Bild hier ablegen oder einfügen
Ihr Bild wird nie hochgeladen. Es wird in diesem Tab nachgezeichnet.Vollständigen Konverter öffnen
Preset
- 01Logo16 Farben
- 02StrichzeichnungSchwarz-Weiß
- 03Foto64 Farben
- 04Stickerei8 Farben · Cutout
- 05Vinyl — für diese Seite eingestellt4 Farben · Cutout
- 06LaserSchwarz-Weiß · Polygon
- Ausgabe · SVG · PDF · EPS · DXF
- Vorschau kostenlos · Download mit Pro 9,00 € / Monat
- Ihre Datei bleibt in diesem Tab
Was die Software braucht
- One layer per colour
- Each colour is a separate sheet of vinyl, cut separately and layered by hand. Cutout mode produces exactly that: disjoint regions with no overlap to register.
- Nothing too thin to weed
- Thin slivers and single-pixel bridges cut fine and lift with the waste. The preset filters small regions and drops short edges before they become cut paths.
- Closed contours with correct holes
- The counter of an O has to be its own contour or the blade never cuts it out. Traced region boundaries are closed by construction.
- No fills, no strokes, no effects
- A plotter ignores everything except the path. Drop shadows and outlines from the source image become extra cut shapes, so remove them before tracing rather than after.
- A size decided before the cut
- Scaling after tracing scales the smallest features too. Set the physical size first and check the thinnest part at that size.
Preset
The vinyl preset traces four colours in cutout mode with a heavy speckle filter and a long minimum edge. Every one of those numbers is about weeding: a sliver two pixels wide is a path the blade will cut and your tweezers will tear.
Warum vectortrace
- Beleg 1 / 3
Im Browser und privat
Die Engine ist WebAssembly und läuft in einem Worker auf Ihrem eigenen Rechner. Ihr Bild wird nie hochgeladen — es gibt also nichts zu leaken, nichts zu löschen und nichts, dem Sie vertrauen müssten.
- Beleg 2 / 3
Editierbare Pfade, kein Wrapper
Die Engine gruppiert das Bild in Farbregionen, nimmt die Grenze zwischen ihnen und passt Kurven daran an. Was herauskommt, ist echte Geometrie — eine Füllung pro Region, jeder Knoten von Ihnen verschiebbar — erzeugt im Tab und nie auf einem Server.
- Beleg 3 / 3
Formate für Druck und Produktion
SVG und PDF für Artwork; EPS und DXF für Cutter, Gravierer und Stick-Software. Echte Dateien, die sich in Illustrator, Inkscape und LibreCAD öffnen lassen — kein SVG mit einem JPEG darin.
Benchmark
Gemessen, nicht vermarktet. Der Korpus, die Methode und jede Zahl, die der Lauf erzeugt hat, werden vollständig veröffentlicht.
Methodik → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
Fragen
- 01Does the SVG import into Cricut Design Space or Silhouette Studio?
- Both read SVG. Silhouette Studio also reads DXF in some editions. Import the SVG, confirm the size in the software, and check the smallest feature at that size before you cut.
- 02Why are there tiny shapes in my cut file?
- They are small regions the tracer found and kept. Raise the speckle filter until they disappear from the path count — deleting them by hand afterwards is slower and easy to get half-right.
- 03Can I cut a photograph?
- You can cut a posterisation of one. Trace with two to four colours and treat it as a stencil; a photograph has no natural boundaries to cut along, so the result is a design decision rather than a reproduction.