Vector files for embroidery digitizing
Digitizing starts with clean shapes. Trace the artwork into closed, disjoint paths with a thread-count palette, then hand it to your digitizing software.
- Predefinição
- Bordado
- Paleta
- 8 cores
- Saída
- SVG
- Preço
- Pré-visualização grátis
Solte uma imagem aqui, ou cole
Sua imagem nunca é enviada. Ela é vetorizada nesta aba.Abrir o conversor completo
Predefinição
- 01Logotipo16 cores
- 02Arte linearPreto e branco
- 03Foto64 cores
- 04Bordado — definida para esta página8 cores · Recorte
- 05Vinil4 cores · Recorte
- 06LaserPreto e branco · Polígono
- Saída · SVG · PDF · EPS · DXF
- Pré-visualização grátis · download com o Pro € 9,00 / mês
- Seu arquivo fica nesta aba
O que o software precisa
- Closed paths
- Every shape has to be a closed outline. An open stroke has no interior, and a fill stitch needs an interior to fill.
- No stacked fills
- Cutout mode gives one region per colour with nothing underneath it. Stacked output hides a full-size background shape under the artwork, and the machine stitches all of it.
- Few colours
- One colour is one thread change. The preset caps the palette at eight; drop it further to match the thread chart you actually have on the machine.
- No detail below the stitch minimum
- A shape narrower than a satin stitch cannot be sewn and will pucker the fabric. Speckle filtering removes those regions before they reach the digitizer.
- Real size, decided early
- A mark that reads at 120 mm across a jacket back does not read at 40 mm on a cap. Decide the sewn size before simplifying, because the simplification budget depends on it.
Predefinição
The embroidery preset traces in cutout mode with a small palette and a heavy speckle filter. Cutout matters more than anything else here: stacked regions mean the machine stitches the same ground twice, once under the shape on top of it. Disjoint regions mean one pass per colour.
Por que o vectortrace
- Ficha 1 / 3
No navegador e privado
O mecanismo é WebAssembly rodando em um worker na sua própria máquina. Sua imagem nunca é enviada — então não há nada a vazar, nada a excluir e nada que você precise aceitar apenas por confiança.
- Ficha 2 / 3
Caminhos editáveis, não um invólucro
O mecanismo agrupa a imagem em regiões de cor, extrai a fronteira entre elas e ajusta curvas a ela. O resultado é geometria real — um preenchimento por região, cada nó seu para mover — produzido na aba e nunca em um servidor.
- Ficha 3 / 3
Formatos usados por produção e impressão
SVG e PDF para arte-final; EPS e DXF para plotters de recorte, gravadoras e softwares de bordado. Arquivos de verdade, abertos no Illustrator, Inkscape e LibreCAD — não um SVG com um JPEG dentro.
Benchmark
Medido, não vendido. O corpus, o método e todos os números que a execução produziu são publicados na íntegra.
Metodologia → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
Perguntas
- 01Does this produce a stitch file — DST, PES, EXP?
- No. It produces the clean vector artwork that a digitizing package turns into stitches. Stitch generation is where underlay, pull compensation and density live, and those are decisions about a specific fabric and a specific machine.
- 02Why does cutout mode matter so much for embroidery?
- Because stacked tracing paints regions over each other. The bottom region is still full size underneath, so the machine sews the whole background and then sews the artwork on top of it — double the stitches and a stiff, puckered patch.
- 03How many colours should I trace to?
- The number of threads you are willing to change. Four to six is normal for a logo. Trace to that number rather than trimming afterwards, so the tracer decides which shades merge.