Vector files for embroidery digitizing
Digitizing starts with clean shapes. Trace the artwork into closed, disjoint paths with a thread-count palette, then hand it to your digitizing software.
- プリセット
- 刺繍
- パレット
- 8 色
- 出力
- SVG
- 価格
- 無料プレビュー
ここに画像をドロップ、または貼り付け
画像はアップロードされません。このタブ内でトレースされます。フルコンバーターを開く
プリセット
- 01ロゴ16 色
- 02線画白黒
- 03写真64 色
- 04刺繍 — このページ用の設定8 色 · くり抜き
- 05ビニール4 色 · くり抜き
- 06レーザー白黒 · ポリゴン
- 出力 · SVG · PDF · EPS · DXF
- プレビュー無料・ダウンロードはPro €9.00 / 月
- ファイルはこのタブ内に留まります
ソフトウェアが必要とするもの
- Closed paths
- Every shape has to be a closed outline. An open stroke has no interior, and a fill stitch needs an interior to fill.
- No stacked fills
- Cutout mode gives one region per colour with nothing underneath it. Stacked output hides a full-size background shape under the artwork, and the machine stitches all of it.
- Few colours
- One colour is one thread change. The preset caps the palette at eight; drop it further to match the thread chart you actually have on the machine.
- No detail below the stitch minimum
- A shape narrower than a satin stitch cannot be sewn and will pucker the fabric. Speckle filtering removes those regions before they reach the digitizer.
- Real size, decided early
- A mark that reads at 120 mm across a jacket back does not read at 40 mm on a cap. Decide the sewn size before simplifying, because the simplification budget depends on it.
プリセット
The embroidery preset traces in cutout mode with a small palette and a heavy speckle filter. Cutout matters more than anything else here: stacked regions mean the machine stitches the same ground twice, once under the shape on top of it. Disjoint regions mean one pass per colour.
vectortraceを選ぶ理由
- チケット 1 / 3
ブラウザ内で完結・非公開
エンジンはお使いの端末上のワーカーで動作するWebAssemblyです。画像がアップロードされることはないため、漏洩する心配も、削除する必要も、信用に頼る必要もありません。
- チケット 2 / 3
ラッパーではなく編集可能なパス
エンジンは画像を色領域にグループ化し、その境界を取り出してカーブをフィットさせます。出力されるのは実際の形状です — 領域ごとに1つの塗り、すべてのノードを自由に動かせます — タブ内で生成され、サーバー上で生成されることはありません。
- チケット 3 / 3
印刷・製造現場で使われる形式
アートワーク用にSVGとPDF、カッター・彫刻機・刺繍ソフト用にEPSとDXF。Illustrator、Inkscape、LibreCADで実際に開けるファイルです — 中身がJPEGのSVGではありません。
ベンチマーク
宣伝文句ではなく実測値。コーパス、手法、実行で得られたすべての数値を完全に公開しています。
手法 → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
よくある質問
- 01Does this produce a stitch file — DST, PES, EXP?
- No. It produces the clean vector artwork that a digitizing package turns into stitches. Stitch generation is where underlay, pull compensation and density live, and those are decisions about a specific fabric and a specific machine.
- 02Why does cutout mode matter so much for embroidery?
- Because stacked tracing paints regions over each other. The bottom region is still full size underneath, so the machine sews the whole background and then sews the artwork on top of it — double the stitches and a stiff, puckered patch.
- 03How many colours should I trace to?
- The number of threads you are willing to change. Four to six is normal for a logo. Trace to that number rather than trimming afterwards, so the tracer decides which shades merge.