Vector files for sign making
Sign work needs the same mark twice: as cut paths for the plotter and as print artwork for the RIP. Trace once, export both.
- プリセット
- ビニール
- パレット
- 4 色
- 出力
- EPS
- 価格
- 無料プレビュー
ここに画像をドロップ、または貼り付け
画像はアップロードされません。このタブ内でトレースされます。フルコンバーターを開く
プリセット
- 01ロゴ16 色
- 02線画白黒
- 03写真64 色
- 04刺繍8 色 · くり抜き
- 05ビニール — このページ用の設定4 色 · くり抜き
- 06レーザー白黒 · ポリゴン
- 出力 · SVG · PDF · EPS · DXF
- プレビュー無料・ダウンロードはPro €9.00 / 月
- ファイルはこのタブ内に留まります
ソフトウェアが必要とするもの
- EPS for the RIP
- Large-format RIPs were built around PostScript and most shops still ask for EPS. The traced paths export as Encapsulated PostScript, not as a bitmap in a wrapper.
- DXF or SVG for the plotter
- Cut paths go to the plotter separately from the print file. DXF carries units; SVG is what the newer cutting software prefers.
- Legible at viewing distance
- A detail that disappears at ten metres is weight the file does not need. Simplify to what will actually be read from where people stand.
- Colours the shop can match
- Trace to flat fills, then assign spot or vinyl colours in your editor against the shop swatch book. The tracer produces process colours; matching is a shop decision.
- Weeding checked at real size
- Check the thinnest stroke at the finished size, not on screen. A serif that survives at 200 mm tears at 60 mm.
プリセット
The vinyl preset is the safe default for sign work because cut paths are the stricter of the two outputs. Anything that cuts cleanly also prints cleanly; the reverse is not true, and finding out at the plotter is expensive.
vectortraceを選ぶ理由
- チケット 1 / 3
ブラウザ内で完結・非公開
エンジンはお使いの端末上のワーカーで動作するWebAssemblyです。画像がアップロードされることはないため、漏洩する心配も、削除する必要も、信用に頼る必要もありません。
- チケット 2 / 3
ラッパーではなく編集可能なパス
エンジンは画像を色領域にグループ化し、その境界を取り出してカーブをフィットさせます。出力されるのは実際の形状です — 領域ごとに1つの塗り、すべてのノードを自由に動かせます — タブ内で生成され、サーバー上で生成されることはありません。
- チケット 3 / 3
印刷・製造現場で使われる形式
アートワーク用にSVGとPDF、カッター・彫刻機・刺繍ソフト用にEPSとDXF。Illustrator、Inkscape、LibreCADで実際に開けるファイルです — 中身がJPEGのSVGではありません。
ベンチマーク
宣伝文句ではなく実測値。コーパス、手法、実行で得られたすべての数値を完全に公開しています。
手法 → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
よくある質問
- 01The customer only has a JPG of their logo. Is that enough?
- Usually yes for signage, with a caveat. JPEG ringing along the edges traces as a rippling contour, so filter it first and check the result at the finished size. If a print-quality original exists anywhere, it is worth one more email.
- 02Why do sign shops still ask for EPS?
- Because the RIP takes it and always has. It is a workflow that works, not a quality difference — the same outlines are in the SVG.
- 03Can I get both a cut file and a print file from one trace?
- Yes. The traced document is exported by several writers, so DXF for the plotter and EPS or PDF for the RIP come from the same geometry rather than from two separate traces that drift apart.