Vector files for vinyl cutting
A plotter follows outlines. Trace the artwork into a small number of closed, disjoint shapes — one per colour of vinyl — with nothing too thin to weed.
- プリセット
- ビニール
- パレット
- 4 色
- 出力
- SVG
- 価格
- 無料プレビュー
ここに画像をドロップ、または貼り付け
画像はアップロードされません。このタブ内でトレースされます。フルコンバーターを開く
プリセット
- 01ロゴ16 色
- 02線画白黒
- 03写真64 色
- 04刺繍8 色 · くり抜き
- 05ビニール — このページ用の設定4 色 · くり抜き
- 06レーザー白黒 · ポリゴン
- 出力 · SVG · PDF · EPS · DXF
- プレビュー無料・ダウンロードはPro €9.00 / 月
- ファイルはこのタブ内に留まります
ソフトウェアが必要とするもの
- One layer per colour
- Each colour is a separate sheet of vinyl, cut separately and layered by hand. Cutout mode produces exactly that: disjoint regions with no overlap to register.
- Nothing too thin to weed
- Thin slivers and single-pixel bridges cut fine and lift with the waste. The preset filters small regions and drops short edges before they become cut paths.
- Closed contours with correct holes
- The counter of an O has to be its own contour or the blade never cuts it out. Traced region boundaries are closed by construction.
- No fills, no strokes, no effects
- A plotter ignores everything except the path. Drop shadows and outlines from the source image become extra cut shapes, so remove them before tracing rather than after.
- A size decided before the cut
- Scaling after tracing scales the smallest features too. Set the physical size first and check the thinnest part at that size.
プリセット
The vinyl preset traces four colours in cutout mode with a heavy speckle filter and a long minimum edge. Every one of those numbers is about weeding: a sliver two pixels wide is a path the blade will cut and your tweezers will tear.
vectortraceを選ぶ理由
- チケット 1 / 3
ブラウザ内で完結・非公開
エンジンはお使いの端末上のワーカーで動作するWebAssemblyです。画像がアップロードされることはないため、漏洩する心配も、削除する必要も、信用に頼る必要もありません。
- チケット 2 / 3
ラッパーではなく編集可能なパス
エンジンは画像を色領域にグループ化し、その境界を取り出してカーブをフィットさせます。出力されるのは実際の形状です — 領域ごとに1つの塗り、すべてのノードを自由に動かせます — タブ内で生成され、サーバー上で生成されることはありません。
- チケット 3 / 3
印刷・製造現場で使われる形式
アートワーク用にSVGとPDF、カッター・彫刻機・刺繍ソフト用にEPSとDXF。Illustrator、Inkscape、LibreCADで実際に開けるファイルです — 中身がJPEGのSVGではありません。
ベンチマーク
宣伝文句ではなく実測値。コーパス、手法、実行で得られたすべての数値を完全に公開しています。
手法 → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
よくある質問
- 01Does the SVG import into Cricut Design Space or Silhouette Studio?
- Both read SVG. Silhouette Studio also reads DXF in some editions. Import the SVG, confirm the size in the software, and check the smallest feature at that size before you cut.
- 02Why are there tiny shapes in my cut file?
- They are small regions the tracer found and kept. Raise the speckle filter until they disappear from the path count — deleting them by hand afterwards is slower and easy to get half-right.
- 03Can I cut a photograph?
- You can cut a posterisation of one. Trace with two to four colours and treat it as a stencil; a photograph has no natural boundaries to cut along, so the result is a design decision rather than a reproduction.