Vector files for laser cutting
A laser follows a path. Trace the artwork into closed polygon contours, decide cut versus engrave, and export DXF with real units.
- Preset
- Laser
- Paleta
- Czarno-białe
- Wyjście
- DXF
- Cena
- Darmowy podgląd
Upuść tu obraz albo wklej
Twój obraz nigdy nie jest przesyłany. Jest wektoryzowany w tej karcie.Otwórz pełny konwerter
Preset
- 01Logo16 kolorów
- 02Grafika liniowaCzarno-białe
- 03Zdjęcie64 kolorów
- 04Haft8 kolorów · Wycinanka
- 05Folia4 kolorów · Wycinanka
- 06Laser — ustawiony dla tej stronyCzarno-białe · Wielokąt
- Wyjście · SVG · PDF · EPS · DXF
- Podgląd za darmo · pobieranie z Pro 9,00 € / miesiąc
- Twój plik zostaje w tej karcie
Czego potrzebuje oprogramowanie
- DXF the machine software reads
- The exporter targets AutoCAD R2000 (AC1015). It is the version LightBurn, LibreCAD, Fusion and most CAM importers list as their safe default.
- Real drawing units
- DXF carries units, so the drawing has a physical size before it reaches the machine. Set it here rather than scaling in the controller, where the rounding is invisible.
- Closed contours, holes included
- A cut path has to close or the part falls out mid-job. Interior holes are separate contours with opposite winding, which is how a cutter knows to keep the middle of an O.
- Cut and engrave are different files
- A traced outline is a region boundary, so a drawn line becomes two contours — one per side. Cutting that gives you a hairline sliver; engraving it wants a centreline your machine software generates.
- Kerf accounted for once
- The beam removes material. Apply kerf compensation in the machine software, not by scaling the artwork, or you will apply it twice.
Preset
The laser preset traces binary — the machine has no colours, only power settings — and fits straight polygon segments at high coordinate precision. A polyline says exactly one thing to a controller; a spline gets re-interpolated by every piece of software between here and the head.
Dlaczego vectortrace
- Pozycja 1 / 3
W przeglądarce i prywatnie
Silnik to WebAssembly działający w wątku roboczym na Twoim własnym urządzeniu. Twój obraz nigdy nie jest przesyłany — więc nie ma nic do wycieku, nic do usunięcia i nic, czemu trzeba by zaufać na słowo.
- Pozycja 2 / 3
Edytowalne ścieżki, nie opakowanie
Silnik grupuje obraz w regiony kolorów, wyznacza granicę między nimi i dopasowuje do niej krzywe. Wynikiem jest prawdziwa geometria — jedno wypełnienie na region, każdy węzeł do przesunięcia — powstająca w karcie i nigdy na serwerze.
- Pozycja 3 / 3
Formaty używane w druku i produkcji
SVG i PDF do grafiki; EPS i DXF dla ploterów, grawerek i oprogramowania hafciarskiego. Prawdziwe pliki, otwierane w Illustratorze, Inkscape i LibreCAD — a nie SVG z osadzonym JPEG-iem.
Test
Zmierzone, nie zmarketingowane. Korpus, metoda i wszystkie dane liczbowe z testu są publikowane w całości.
Metodologia → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
Pytania
- 01DXF or SVG for a laser?
- DXF if the software takes it, because it carries units and every CAM tool reads it. SVG if you are going through LightBurn or a browser-based controller that prefers it. The geometry is identical; only the container differs.
- 02Why did my engraved line come out as two lines?
- Because tracing outlines regions, and a stroke is a thin region with two sides. That is right for cutting a shape out and wrong for engraving. Use the centreline option in your machine software for line work.
- 03What DXF version is written?
- AutoCAD R2000 (AC1015). Newer DXF versions add features a cutter never uses and drop compatibility with importers that were written once and never updated.