vectortrace.app
Ücretsiz önizleme · yükleme yok

Convert JPG to DXF

A JPG is the worst input a cutter can get and the one you are most often given. Filter the artefacts first, then export DXF outlines a machine can follow.

Girdi
JPG
Çıktı
DXF
Motor
WASM, sekmenizde
Fiyat
Ücretsiz önizleme
İş fişiJPG → DXF · Ön ayar: Lazer

Bir görseli buraya bırakın veya yapıştırın

PDFDXF

Görseliniz asla yüklenmez. Bu sekmede çizilir.Tam dönüştürücüyü aç

Ön ayar

  • 01Logo16 renk
  • 02Çizgi sanatıSiyah beyaz
  • 03Fotoğraf64 renk
  • 04Nakış8 renk · Kesim
  • 05Vinil4 renk · Kesim
  • 06Lazer — bu sayfa için ayarlandıSiyah beyaz · Çokgen
01

Neden vectortrace

3 iddia · sabit sıra
02

Biçim bilgileri

JPG giriş · DXF çıkış
Biçim bilgileriJPG · girişDXF · çıkış
TürRaster. A grid of pixels, stored in 8x8 blocks.Vector. AutoCAD Drawing Interchange — geometry and layers, no fills.
ÖlçeklemeBlurs past its native size, and the block artefacts scale with it.Sharp at any size, and it carries real drawing units.
RenkUp to 16.7 million colours, no alpha channel. Lossy.None as a fill. Colour in DXF is a property of the layer.
Düzenlenebildiği yerPhotoshop, GIMP, Affinity Photo.LibreCAD, AutoCAD, Fusion 360, LightBurn, most cutter software.
Tipik kullanımPhotographs, camera output, anything a client emails you.Laser cutters, CNC routers, plasma tables, vinyl plotters.
03

Bilinmesi gerekenler

JPEG ringing around a hard edge is a band of intermediate pixels a few wide, and the tracer turns each stray band into its own tiny region. Raising the speckle filter drops those regions before they become paths, and lowering the palette merges the block-to-block colour drift back into one fill; between them they are what removes the wobble a cutter would otherwise follow.

If you can get the original PNG, PDF or AI file, use that instead. A JPEG of a logo has already thrown away the information that defines the edge, and no tracer can put it back — it can only make a defensible guess.

DXF has no fills, so what you are producing is a cut path. Decide before exporting whether you are cutting the shape out or engraving it: the first wants the outline, the second wants a centreline your machine software generates.

04

Nasıl çalışır

3 adım

  1. Drop the JPG

    Drop the artwork. It is decoded and traced locally.

  2. Filter the artefacts

    Laser preset, then raise the speckle filter until the contour stops rippling along the edges.

  3. Export DXF

    Check units and interior holes in your machine software before cutting anything expensive.

05

Kıyaslama

Rakamsız, tarihsiz ve sürümsüz iddia yok.
smoke (30 fixtures) · 2026-09-05 · 0.3.34

Ölçüldü, pazarlanmadı. Külliyat, yöntem ve koşunun ürettiği her rakam tam olarak yayımlanır.

Yöntem → /benchmarks
boundary error, p95
0.09 px
region-count error
0.000
node-count ratio
1.00×
06

Sorular

3 soru
01Why does the cut path look wobbly?
JPEG ringing. The compressor put a band of intermediate pixels along every hard edge, and a threshold-based trace follows that band. Raise the speckle filter, drop the colour count, and if you can, get a lossless copy of the artwork.
02Which DXF version is written?
AutoCAD R2000 (AC1015) — the version cutter, CAM and sign software reads most reliably.
03Does the file leave my machine?
No. The tracer is WebAssembly running in a Web Worker in this tab, so the pixels stay on your machine. There is no upload step, which is also why it keeps working with the network off.
07

İlgili

7 bağlantı

İlgili dönüşümler

Şunlar için yapıldı

Oku