Vector files for laser cutting
A laser follows a path. Trace the artwork into closed polygon contours, decide cut versus engrave, and export DXF with real units.
- Ön ayar
- Lazer
- Palet
- Siyah beyaz
- Çıktı
- DXF
- Fiyat
- Ücretsiz önizleme
Bir görseli buraya bırakın veya yapıştırın
Görseliniz asla yüklenmez. Bu sekmede çizilir.Tam dönüştürücüyü aç
Ön ayar
- 01Logo16 renk
- 02Çizgi sanatıSiyah beyaz
- 03Fotoğraf64 renk
- 04Nakış8 renk · Kesim
- 05Vinil4 renk · Kesim
- 06Lazer — bu sayfa için ayarlandıSiyah beyaz · Çokgen
- Çıktı · SVG · PDF · EPS · DXF
- Önizleme ücretsiz · Pro ile indirme ayda €9,00
- Dosyanız bu sekmede kalır
Yazılımın ihtiyaç duyduğu
- DXF the machine software reads
- The exporter targets AutoCAD R2000 (AC1015). It is the version LightBurn, LibreCAD, Fusion and most CAM importers list as their safe default.
- Real drawing units
- DXF carries units, so the drawing has a physical size before it reaches the machine. Set it here rather than scaling in the controller, where the rounding is invisible.
- Closed contours, holes included
- A cut path has to close or the part falls out mid-job. Interior holes are separate contours with opposite winding, which is how a cutter knows to keep the middle of an O.
- Cut and engrave are different files
- A traced outline is a region boundary, so a drawn line becomes two contours — one per side. Cutting that gives you a hairline sliver; engraving it wants a centreline your machine software generates.
- Kerf accounted for once
- The beam removes material. Apply kerf compensation in the machine software, not by scaling the artwork, or you will apply it twice.
Ön ayar
The laser preset traces binary — the machine has no colours, only power settings — and fits straight polygon segments at high coordinate precision. A polyline says exactly one thing to a controller; a spline gets re-interpolated by every piece of software between here and the head.
Neden vectortrace
- Fiş 1 / 3
Tarayıcı içi ve özel
Motor, kendi makinenizde bir çalışanda çalışan WebAssembly'dir. Görseliniz asla yüklenmez — bu yüzden sızdırılacak bir şey, silinecek bir şey ve güvenilecek bir şey yoktur.
- Fiş 2 / 3
Bir sarmalayıcı değil, düzenlenebilir yollar
Motor, görseli renk bölgelerine ayırır, aralarındaki sınırı alır ve ona eğriler oturtur. Ortaya çıkan gerçek geometridir — bölge başına tek dolgu, her düğüm sizin taşımanız için — sekmede üretilir ve asla sunucuda değil.
- Fiş 3 / 3
Baskı ve üretimin kullandığı biçimler
Eser için SVG ve PDF; kesiciler, gravür makineleri ve nakış yazılımları için EPS ve DXF. Illustrator, Inkscape ve LibreCAD'de açılan gerçek dosyalar — içinde JPEG olan bir SVG değil.
Kıyaslama
Ölçüldü, pazarlanmadı. Külliyat, yöntem ve koşunun ürettiği her rakam tam olarak yayımlanır.
Yöntem → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
Sorular
- 01DXF or SVG for a laser?
- DXF if the software takes it, because it carries units and every CAM tool reads it. SVG if you are going through LightBurn or a browser-based controller that prefers it. The geometry is identical; only the container differs.
- 02Why did my engraved line come out as two lines?
- Because tracing outlines regions, and a stroke is a thin region with two sides. That is right for cutting a shape out and wrong for engraving. Use the centreline option in your machine software for line work.
- 03What DXF version is written?
- AutoCAD R2000 (AC1015). Newer DXF versions add features a cutter never uses and drop compatibility with importers that were written once and never updated.