Vector files for embroidery digitizing
Digitizing starts with clean shapes. Trace the artwork into closed, disjoint paths with a thread-count palette, then hand it to your digitizing software.
- Voorinstelling
- Borduurwerk
- Palet
- 8 kleuren
- Uitvoer
- SVG
- Prijs
- Gratis preview
Sleep hier een afbeelding naartoe, of plak
Je afbeelding wordt nooit geüpload. Die wordt getraceerd in dit tabblad.Open de volledige converter
Voorinstelling
- 01Logo16 kleuren
- 02LijntekeningZwart-wit
- 03Foto64 kleuren
- 04Borduurwerk — ingesteld voor deze pagina8 kleuren · Uitsnede
- 05Vinyl4 kleuren · Uitsnede
- 06LaserZwart-wit · Polygoon
- Uitvoer · SVG · PDF · EPS · DXF
- Preview gratis · download met Pro € 9,00 / maand
- Je bestand blijft in dit tabblad
Wat de software nodig heeft
- Closed paths
- Every shape has to be a closed outline. An open stroke has no interior, and a fill stitch needs an interior to fill.
- No stacked fills
- Cutout mode gives one region per colour with nothing underneath it. Stacked output hides a full-size background shape under the artwork, and the machine stitches all of it.
- Few colours
- One colour is one thread change. The preset caps the palette at eight; drop it further to match the thread chart you actually have on the machine.
- No detail below the stitch minimum
- A shape narrower than a satin stitch cannot be sewn and will pucker the fabric. Speckle filtering removes those regions before they reach the digitizer.
- Real size, decided early
- A mark that reads at 120 mm across a jacket back does not read at 40 mm on a cap. Decide the sewn size before simplifying, because the simplification budget depends on it.
Voorinstelling
The embroidery preset traces in cutout mode with a small palette and a heavy speckle filter. Cutout matters more than anything else here: stacked regions mean the machine stitches the same ground twice, once under the shape on top of it. Disjoint regions mean one pass per colour.
Waarom vectortrace
- Bon 1 / 3
In de browser en privé
De engine is WebAssembly die draait in een worker op je eigen apparaat. Je afbeelding wordt nooit geüpload — er is dus niets te lekken, niets te verwijderen en niets om op vertrouwen aan te nemen.
- Bon 2 / 3
Bewerkbare paden, geen omhulsel
De engine groepeert de afbeelding in kleurgebieden, neemt de grens ertussen en past er curven op. Het resultaat is echte geometrie — één vulling per gebied, elk ankerpunt door jou te verplaatsen — geproduceerd in het tabblad en nooit op een server.
- Bon 3 / 3
Formaten die print en productie gebruiken
SVG en PDF voor werktekeningen; EPS en DXF voor snijplotters, graveermachines en borduursoftware. Echte bestanden, te openen in Illustrator, Inkscape en LibreCAD — geen SVG met een JPEG erin verstopt.
Benchmark
Gemeten, niet verkocht. De corpus, de methode en elk cijfer dat de run opleverde worden volledig gepubliceerd.
Methodologie → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
Vragen
- 01Does this produce a stitch file — DST, PES, EXP?
- No. It produces the clean vector artwork that a digitizing package turns into stitches. Stitch generation is where underlay, pull compensation and density live, and those are decisions about a specific fabric and a specific machine.
- 02Why does cutout mode matter so much for embroidery?
- Because stacked tracing paints regions over each other. The bottom region is still full size underneath, so the machine sews the whole background and then sews the artwork on top of it — double the stitches and a stiff, puckered patch.
- 03How many colours should I trace to?
- The number of threads you are willing to change. Four to six is normal for a logo. Trace to that number rather than trimming afterwards, so the tracer decides which shades merge.