Vector files for vinyl cutting
A plotter follows outlines. Trace the artwork into a small number of closed, disjoint shapes — one per colour of vinyl — with nothing too thin to weed.
- Voorinstelling
- Vinyl
- Palet
- 4 kleuren
- Uitvoer
- SVG
- Prijs
- Gratis preview
Sleep hier een afbeelding naartoe, of plak
Je afbeelding wordt nooit geüpload. Die wordt getraceerd in dit tabblad.Open de volledige converter
Voorinstelling
- 01Logo16 kleuren
- 02LijntekeningZwart-wit
- 03Foto64 kleuren
- 04Borduurwerk8 kleuren · Uitsnede
- 05Vinyl — ingesteld voor deze pagina4 kleuren · Uitsnede
- 06LaserZwart-wit · Polygoon
- Uitvoer · SVG · PDF · EPS · DXF
- Preview gratis · download met Pro € 9,00 / maand
- Je bestand blijft in dit tabblad
Wat de software nodig heeft
- One layer per colour
- Each colour is a separate sheet of vinyl, cut separately and layered by hand. Cutout mode produces exactly that: disjoint regions with no overlap to register.
- Nothing too thin to weed
- Thin slivers and single-pixel bridges cut fine and lift with the waste. The preset filters small regions and drops short edges before they become cut paths.
- Closed contours with correct holes
- The counter of an O has to be its own contour or the blade never cuts it out. Traced region boundaries are closed by construction.
- No fills, no strokes, no effects
- A plotter ignores everything except the path. Drop shadows and outlines from the source image become extra cut shapes, so remove them before tracing rather than after.
- A size decided before the cut
- Scaling after tracing scales the smallest features too. Set the physical size first and check the thinnest part at that size.
Voorinstelling
The vinyl preset traces four colours in cutout mode with a heavy speckle filter and a long minimum edge. Every one of those numbers is about weeding: a sliver two pixels wide is a path the blade will cut and your tweezers will tear.
Waarom vectortrace
- Bon 1 / 3
In de browser en privé
De engine is WebAssembly die draait in een worker op je eigen apparaat. Je afbeelding wordt nooit geüpload — er is dus niets te lekken, niets te verwijderen en niets om op vertrouwen aan te nemen.
- Bon 2 / 3
Bewerkbare paden, geen omhulsel
De engine groepeert de afbeelding in kleurgebieden, neemt de grens ertussen en past er curven op. Het resultaat is echte geometrie — één vulling per gebied, elk ankerpunt door jou te verplaatsen — geproduceerd in het tabblad en nooit op een server.
- Bon 3 / 3
Formaten die print en productie gebruiken
SVG en PDF voor werktekeningen; EPS en DXF voor snijplotters, graveermachines en borduursoftware. Echte bestanden, te openen in Illustrator, Inkscape en LibreCAD — geen SVG met een JPEG erin verstopt.
Benchmark
Gemeten, niet verkocht. De corpus, de methode en elk cijfer dat de run opleverde worden volledig gepubliceerd.
Methodologie → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
Vragen
- 01Does the SVG import into Cricut Design Space or Silhouette Studio?
- Both read SVG. Silhouette Studio also reads DXF in some editions. Import the SVG, confirm the size in the software, and check the smallest feature at that size before you cut.
- 02Why are there tiny shapes in my cut file?
- They are small regions the tracer found and kept. Raise the speckle filter until they disappear from the path count — deleting them by hand afterwards is slower and easy to get half-right.
- 03Can I cut a photograph?
- You can cut a posterisation of one. Trace with two to four colours and treat it as a stencil; a photograph has no natural boundaries to cut along, so the result is a design decision rather than a reproduction.