Vector files for sign making
Sign work needs the same mark twice: as cut paths for the plotter and as print artwork for the RIP. Trace once, export both.
- Voorinstelling
- Vinyl
- Palet
- 4 kleuren
- Uitvoer
- EPS
- Prijs
- Gratis preview
Sleep hier een afbeelding naartoe, of plak
Je afbeelding wordt nooit geüpload. Die wordt getraceerd in dit tabblad.Open de volledige converter
Voorinstelling
- 01Logo16 kleuren
- 02LijntekeningZwart-wit
- 03Foto64 kleuren
- 04Borduurwerk8 kleuren · Uitsnede
- 05Vinyl — ingesteld voor deze pagina4 kleuren · Uitsnede
- 06LaserZwart-wit · Polygoon
- Uitvoer · SVG · PDF · EPS · DXF
- Preview gratis · download met Pro € 9,00 / maand
- Je bestand blijft in dit tabblad
Wat de software nodig heeft
- EPS for the RIP
- Large-format RIPs were built around PostScript and most shops still ask for EPS. The traced paths export as Encapsulated PostScript, not as a bitmap in a wrapper.
- DXF or SVG for the plotter
- Cut paths go to the plotter separately from the print file. DXF carries units; SVG is what the newer cutting software prefers.
- Legible at viewing distance
- A detail that disappears at ten metres is weight the file does not need. Simplify to what will actually be read from where people stand.
- Colours the shop can match
- Trace to flat fills, then assign spot or vinyl colours in your editor against the shop swatch book. The tracer produces process colours; matching is a shop decision.
- Weeding checked at real size
- Check the thinnest stroke at the finished size, not on screen. A serif that survives at 200 mm tears at 60 mm.
Voorinstelling
The vinyl preset is the safe default for sign work because cut paths are the stricter of the two outputs. Anything that cuts cleanly also prints cleanly; the reverse is not true, and finding out at the plotter is expensive.
Waarom vectortrace
- Bon 1 / 3
In de browser en privé
De engine is WebAssembly die draait in een worker op je eigen apparaat. Je afbeelding wordt nooit geüpload — er is dus niets te lekken, niets te verwijderen en niets om op vertrouwen aan te nemen.
- Bon 2 / 3
Bewerkbare paden, geen omhulsel
De engine groepeert de afbeelding in kleurgebieden, neemt de grens ertussen en past er curven op. Het resultaat is echte geometrie — één vulling per gebied, elk ankerpunt door jou te verplaatsen — geproduceerd in het tabblad en nooit op een server.
- Bon 3 / 3
Formaten die print en productie gebruiken
SVG en PDF voor werktekeningen; EPS en DXF voor snijplotters, graveermachines en borduursoftware. Echte bestanden, te openen in Illustrator, Inkscape en LibreCAD — geen SVG met een JPEG erin verstopt.
Benchmark
Gemeten, niet verkocht. De corpus, de methode en elk cijfer dat de run opleverde worden volledig gepubliceerd.
Methodologie → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
Vragen
- 01The customer only has a JPG of their logo. Is that enough?
- Usually yes for signage, with a caveat. JPEG ringing along the edges traces as a rippling contour, so filter it first and check the result at the finished size. If a print-quality original exists anywhere, it is worth one more email.
- 02Why do sign shops still ask for EPS?
- Because the RIP takes it and always has. It is a workflow that works, not a quality difference — the same outlines are in the SVG.
- 03Can I get both a cut file and a print file from one trace?
- Yes. The traced document is exported by several writers, so DXF for the plotter and EPS or PDF for the RIP come from the same geometry rather than from two separate traces that drift apart.