Convert PNG to DXF
Cutter software wants outlines, not pixels. Trace the PNG into closed paths here, then export DXF for LightBurn, LibreCAD, Fusion 360 or your plotter.
- 입력
- PNG
- 출력
- DXF
- 엔진
- WASM, 여러분의 탭에서
- 가격
- 무료 미리보기
이미지를 여기에 놓거나 붙여넣으세요
이미지는 업로드되지 않습니다. 이 탭에서 트레이싱됩니다.전체 변환기 열기
프리셋
- 01로고16색
- 02선화흑백
- 03사진64색
- 04자수8색 · 컷아웃형
- 05비닐4색 · 컷아웃형
- 06레이저 — 이 페이지에 설정됨흑백 · 폴리곤
- 출력 · SVG · PDF · EPS · DXF
- 미리보기 무료 · 다운로드는 Pro 월 €9.00
- 파일이 이 탭 안에 머뭅니다
vectortrace를 선택하는 이유
- 전표 1 / 3
브라우저 내 실행, 완전한 비공개
엔진은 여러분의 기기에서 워커로 실행되는 WebAssembly입니다. 이미지는 업로드되지 않으므로 유출될 것도, 삭제할 것도, 믿고 맡길 것도 없습니다.
- 전표 2 / 3
감싼 것이 아니라 편집 가능한 패스
엔진은 이미지를 색상 영역으로 그룹화하고, 그 경계를 추출해 곡선을 피팅합니다. 결과물은 실제 지오메트리입니다 — 영역마다 하나의 채우기, 여러분이 직접 옮길 수 있는 모든 노드 — 탭 안에서 만들어지며 서버에서는 결코 만들어지지 않습니다.
- 전표 3 / 3
인쇄와 생산 현장에서 쓰는 형식
아트워크용 SVG와 PDF, 커터·조각기·자수 소프트웨어용 EPS와 DXF. Illustrator, Inkscape, LibreCAD에서 바로 열리는 실제 파일 — JPEG를 감싼 SVG가 아닙니다.
형식 정보
| 형식 정보 | PNG · 입력 | DXF · 출력 |
|---|---|---|
| 종류 | Raster. A grid of pixels. | Vector. AutoCAD Drawing Interchange — geometry and layers, no fills. |
| 확대/축소 | Blurs or pixelates past its native size. | Sharp at any size, and it carries real drawing units. |
| 색상 | Up to 16.7 million colours with 8-bit alpha. Lossless. | None as a fill. Colour in DXF is a property of the layer. |
| 편집 가능 프로그램 | Photoshop, GIMP, Affinity Photo. | LibreCAD, AutoCAD, Fusion 360, LightBurn, most cutter software. |
| 일반적 용도 | Screenshots, web images, marks exported from a design tool. | Laser cutters, CNC routers, plasma tables, vinyl plotters. |
알아두면 좋은 점
DXF describes geometry and layers. It has no fills, no gradients and no alpha — a cutter only needs to know where the tool goes. That is why the laser preset traces binary and fits straight polygon segments rather than splines: a machine controller interpolates arcs its own way, and a polyline says exactly one thing.
DXF also carries drawing units, which SVG does not by default. The size you cut is the size in the file, so decide the physical dimensions before you export rather than scaling in the machine software afterwards.
Interior holes matter. A letter O has to be two closed contours with opposite winding or the cutter fills it in. Cutout mode produces disjoint regions for exactly this reason.
작동 방식
Drop the PNG
Drop the mark or drawing you want to cut. It is traced in this tab.
Use the laser preset
Binary trace, polygon fitting, high coordinate precision. Check that interior holes are separate closed contours.
Export DXF
Open the result in LightBurn, LibreCAD or your machine software and confirm the units before you cut.
벤치마크
마케팅이 아니라 측정입니다. 코퍼스, 방법론, 그리고 실행이 만들어낸 모든 수치를 빠짐없이 게시합니다.
방법론 → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
질문
- 01Which DXF version is written?
- The exporter targets AutoCAD R2000 (AC1015), which is the version cutter and CAM software reads most reliably. It is also the version most sign and laser tools list as their recommended import.
- 02Why does my cut have double lines?
- A traced outline is a filled region boundary, so a stroke in the original becomes two contours — one for each side of the line. That is correct for cutting a shape out and wrong for engraving a line; for engraving, cut on a centreline in your machine software.
- 03Can I set the size in millimetres?
- DXF carries units, so the exported drawing has a real size. Set the physical dimensions before export rather than scaling afterwards, which is where rounding creeps in.
관련
관련 변환