Convert PNG to EPS
Plenty of print workflows still ask for EPS. Trace the PNG into paths here and export Encapsulated PostScript your printer will accept.
- 입력
- PNG
- 출력
- EPS
- 엔진
- WASM, 여러분의 탭에서
- 가격
- 무료 미리보기
이미지를 여기에 놓거나 붙여넣으세요
이미지는 업로드되지 않습니다. 이 탭에서 트레이싱됩니다.전체 변환기 열기
프리셋
- 01로고 — 이 페이지에 설정됨16색
- 02선화흑백
- 03사진64색
- 04자수8색 · 컷아웃형
- 05비닐4색 · 컷아웃형
- 06레이저흑백 · 폴리곤
- 출력 · SVG · PDF · EPS · DXF
- 미리보기 무료 · 다운로드는 Pro 월 €9.00
- 파일이 이 탭 안에 머뭅니다
vectortrace를 선택하는 이유
- 전표 1 / 3
브라우저 내 실행, 완전한 비공개
엔진은 여러분의 기기에서 워커로 실행되는 WebAssembly입니다. 이미지는 업로드되지 않으므로 유출될 것도, 삭제할 것도, 믿고 맡길 것도 없습니다.
- 전표 2 / 3
감싼 것이 아니라 편집 가능한 패스
엔진은 이미지를 색상 영역으로 그룹화하고, 그 경계를 추출해 곡선을 피팅합니다. 결과물은 실제 지오메트리입니다 — 영역마다 하나의 채우기, 여러분이 직접 옮길 수 있는 모든 노드 — 탭 안에서 만들어지며 서버에서는 결코 만들어지지 않습니다.
- 전표 3 / 3
인쇄와 생산 현장에서 쓰는 형식
아트워크용 SVG와 PDF, 커터·조각기·자수 소프트웨어용 EPS와 DXF. Illustrator, Inkscape, LibreCAD에서 바로 열리는 실제 파일 — JPEG를 감싼 SVG가 아닙니다.
형식 정보
| 형식 정보 | PNG · 입력 | EPS · 출력 |
|---|---|---|
| 종류 | Raster. A grid of pixels. | Vector. Encapsulated PostScript, the pre-press interchange format. |
| 확대/축소 | Blurs or pixelates past its native size. | Sharp at any size. |
| 색상 | Up to 16.7 million colours with 8-bit alpha. Lossless. | Solid fills. Many RIPs still expect EPS rather than SVG. |
| 편집 가능 프로그램 | Photoshop, GIMP, Affinity Photo. | Illustrator, Inkscape, CorelDRAW, most RIP software. |
| 일반적 용도 | Screenshots, web images, marks exported from a design tool. | Screen printing, sign shops, older print workflows. |
알아두면 좋은 점
EPS is Encapsulated PostScript: a PostScript program describing one piece of artwork, with a bounding box. It predates SVG by a decade and survives because RIPs, screen-printing shops and older sign software were built around it and never had a reason to move.
What EPS gives you over a PNG is the same thing SVG does — real outlines that scale and separate. What it gives you over SVG is that the shop on the other end of the email will open it without asking questions.
An EPS with a bitmap inside it is still a bitmap. If a printer rejected your last file for being "not real vector", that is usually what happened: a converter wrapped the raster rather than tracing it.
작동 방식
Drop the PNG
Drop the mark. Flat artwork traces best; keep the palette small if it is going to screen print.
Trace to flat fills
One fill per colour, low node count. Screen printing wants few colours because each one is a screen.
Export EPS
Send it on, or open it in Illustrator or CorelDRAW first to assign spot colours.
벤치마크
마케팅이 아니라 측정입니다. 코퍼스, 방법론, 그리고 실행이 만들어낸 모든 수치를 빠짐없이 게시합니다.
방법론 → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
질문
- 01Why does my printer want EPS instead of SVG?
- Because their RIP was built for PostScript and EPS is the format it has always taken. It is not a quality difference — the same outlines are in both — it is a workflow that works and has not needed changing.
- 02Is an EPS with an image inside it still vector?
- No, and that is the usual reason a print shop rejects a file. EPS can embed a bitmap; the result has a vector wrapper and raster contents, and it prints exactly as badly as the bitmap did.
- 03What about spot colours?
- The trace produces flat process fills. Assigning spot colours is a job for your editor once the paths exist, because which spot library applies depends on the shop.
관련
관련 변환