Vector files for sign making
Sign work needs the same mark twice: as cut paths for the plotter and as print artwork for the RIP. Trace once, export both.
- 프리셋
- 비닐
- 팔레트
- 4색
- 출력
- EPS
- 가격
- 무료 미리보기
이미지를 여기에 놓거나 붙여넣으세요
이미지는 업로드되지 않습니다. 이 탭에서 트레이싱됩니다.전체 변환기 열기
프리셋
- 01로고16색
- 02선화흑백
- 03사진64색
- 04자수8색 · 컷아웃형
- 05비닐 — 이 페이지에 설정됨4색 · 컷아웃형
- 06레이저흑백 · 폴리곤
- 출력 · SVG · PDF · EPS · DXF
- 미리보기 무료 · 다운로드는 Pro 월 €9.00
- 파일이 이 탭 안에 머뭅니다
소프트웨어가 필요로 하는 것
- EPS for the RIP
- Large-format RIPs were built around PostScript and most shops still ask for EPS. The traced paths export as Encapsulated PostScript, not as a bitmap in a wrapper.
- DXF or SVG for the plotter
- Cut paths go to the plotter separately from the print file. DXF carries units; SVG is what the newer cutting software prefers.
- Legible at viewing distance
- A detail that disappears at ten metres is weight the file does not need. Simplify to what will actually be read from where people stand.
- Colours the shop can match
- Trace to flat fills, then assign spot or vinyl colours in your editor against the shop swatch book. The tracer produces process colours; matching is a shop decision.
- Weeding checked at real size
- Check the thinnest stroke at the finished size, not on screen. A serif that survives at 200 mm tears at 60 mm.
프리셋
The vinyl preset is the safe default for sign work because cut paths are the stricter of the two outputs. Anything that cuts cleanly also prints cleanly; the reverse is not true, and finding out at the plotter is expensive.
vectortrace를 선택하는 이유
- 전표 1 / 3
브라우저 내 실행, 완전한 비공개
엔진은 여러분의 기기에서 워커로 실행되는 WebAssembly입니다. 이미지는 업로드되지 않으므로 유출될 것도, 삭제할 것도, 믿고 맡길 것도 없습니다.
- 전표 2 / 3
감싼 것이 아니라 편집 가능한 패스
엔진은 이미지를 색상 영역으로 그룹화하고, 그 경계를 추출해 곡선을 피팅합니다. 결과물은 실제 지오메트리입니다 — 영역마다 하나의 채우기, 여러분이 직접 옮길 수 있는 모든 노드 — 탭 안에서 만들어지며 서버에서는 결코 만들어지지 않습니다.
- 전표 3 / 3
인쇄와 생산 현장에서 쓰는 형식
아트워크용 SVG와 PDF, 커터·조각기·자수 소프트웨어용 EPS와 DXF. Illustrator, Inkscape, LibreCAD에서 바로 열리는 실제 파일 — JPEG를 감싼 SVG가 아닙니다.
벤치마크
마케팅이 아니라 측정입니다. 코퍼스, 방법론, 그리고 실행이 만들어낸 모든 수치를 빠짐없이 게시합니다.
방법론 → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
질문
- 01The customer only has a JPG of their logo. Is that enough?
- Usually yes for signage, with a caveat. JPEG ringing along the edges traces as a rippling contour, so filter it first and check the result at the finished size. If a print-quality original exists anywhere, it is worth one more email.
- 02Why do sign shops still ask for EPS?
- Because the RIP takes it and always has. It is a workflow that works, not a quality difference — the same outlines are in the SVG.
- 03Can I get both a cut file and a print file from one trace?
- Yes. The traced document is exported by several writers, so DXF for the plotter and EPS or PDF for the RIP come from the same geometry rather than from two separate traces that drift apart.