Vector files for laser cutting
A laser follows a path. Trace the artwork into closed polygon contours, decide cut versus engrave, and export DXF with real units.
- 프리셋
- 레이저
- 팔레트
- 흑백
- 출력
- DXF
- 가격
- 무료 미리보기
이미지를 여기에 놓거나 붙여넣으세요
이미지는 업로드되지 않습니다. 이 탭에서 트레이싱됩니다.전체 변환기 열기
프리셋
- 01로고16색
- 02선화흑백
- 03사진64색
- 04자수8색 · 컷아웃형
- 05비닐4색 · 컷아웃형
- 06레이저 — 이 페이지에 설정됨흑백 · 폴리곤
- 출력 · SVG · PDF · EPS · DXF
- 미리보기 무료 · 다운로드는 Pro 월 €9.00
- 파일이 이 탭 안에 머뭅니다
소프트웨어가 필요로 하는 것
- DXF the machine software reads
- The exporter targets AutoCAD R2000 (AC1015). It is the version LightBurn, LibreCAD, Fusion and most CAM importers list as their safe default.
- Real drawing units
- DXF carries units, so the drawing has a physical size before it reaches the machine. Set it here rather than scaling in the controller, where the rounding is invisible.
- Closed contours, holes included
- A cut path has to close or the part falls out mid-job. Interior holes are separate contours with opposite winding, which is how a cutter knows to keep the middle of an O.
- Cut and engrave are different files
- A traced outline is a region boundary, so a drawn line becomes two contours — one per side. Cutting that gives you a hairline sliver; engraving it wants a centreline your machine software generates.
- Kerf accounted for once
- The beam removes material. Apply kerf compensation in the machine software, not by scaling the artwork, or you will apply it twice.
프리셋
The laser preset traces binary — the machine has no colours, only power settings — and fits straight polygon segments at high coordinate precision. A polyline says exactly one thing to a controller; a spline gets re-interpolated by every piece of software between here and the head.
vectortrace를 선택하는 이유
- 전표 1 / 3
브라우저 내 실행, 완전한 비공개
엔진은 여러분의 기기에서 워커로 실행되는 WebAssembly입니다. 이미지는 업로드되지 않으므로 유출될 것도, 삭제할 것도, 믿고 맡길 것도 없습니다.
- 전표 2 / 3
감싼 것이 아니라 편집 가능한 패스
엔진은 이미지를 색상 영역으로 그룹화하고, 그 경계를 추출해 곡선을 피팅합니다. 결과물은 실제 지오메트리입니다 — 영역마다 하나의 채우기, 여러분이 직접 옮길 수 있는 모든 노드 — 탭 안에서 만들어지며 서버에서는 결코 만들어지지 않습니다.
- 전표 3 / 3
인쇄와 생산 현장에서 쓰는 형식
아트워크용 SVG와 PDF, 커터·조각기·자수 소프트웨어용 EPS와 DXF. Illustrator, Inkscape, LibreCAD에서 바로 열리는 실제 파일 — JPEG를 감싼 SVG가 아닙니다.
벤치마크
마케팅이 아니라 측정입니다. 코퍼스, 방법론, 그리고 실행이 만들어낸 모든 수치를 빠짐없이 게시합니다.
방법론 → /benchmarks- boundary error, p95
- 0.09 px
- region-count error
- 0.000
- node-count ratio
- 1.00×
질문
- 01DXF or SVG for a laser?
- DXF if the software takes it, because it carries units and every CAM tool reads it. SVG if you are going through LightBurn or a browser-based controller that prefers it. The geometry is identical; only the container differs.
- 02Why did my engraved line come out as two lines?
- Because tracing outlines regions, and a stroke is a thin region with two sides. That is right for cutting a shape out and wrong for engraving. Use the centreline option in your machine software for line work.
- 03What DXF version is written?
- AutoCAD R2000 (AC1015). Newer DXF versions add features a cutter never uses and drop compatibility with importers that were written once and never updated.